Mon–Fri 9 AM – 5 PM  ·  Sat 9 AM – 1 PM (Walk-Ins)  ·  9129 111 Ave NW, Edmonton Call 780-471-2100  |  Text 780-471-2105
Home  ›  How Your Car Works  ›  Transmission

Transmission

How your transmission matches engine speed to road speed.

How it works

An engine only makes useful power in a narrow speed range, so the transmission uses different gear ratios to match engine speed to road speed: low gears for strong pulling from a stop, high gears for relaxed highway cruising. In a conventional automatic, a torque converter connects the engine to the transmission through fluid, letting the car sit still in gear. Clutch packs inside engage different gear sets, and the computer decides when to shift. A CVT (continuously variable transmission) instead uses a steel belt between two pulleys that change size, giving smooth, stepless gearing. Manuals use a clutch pedal you operate yourself.

Why it wears

Transmission fluid breaks down from heat, loses its friction properties, and collects wear material. Towing, stop-and-go traffic and heavy loads make more heat. Old fluid leads to slipping, harsh shifts, and eventually worn clutches.

Warning signs

Watch for: Slipping (revs rise but the car doesn't speed up), delayed or harsh shifts, shuddering, whining or humming, a burning smell, red or brown fluid leaks, or a transmission warning light.

When to service

Change automatic transmission fluid about every 60,000–90,000 km, sooner if you tow or drive in heavy traffic. CVTs often need fluid every 40,000–60,000 km. Manual transmission fluid lasts longer, typically 60,000–100,000 km. Always use the exact fluid your vehicle calls for.

Go deeper: the technical details
Gear ratios
First gear might be around 4:1, meaning the engine turns four times for each turn of the output shaft, multiplying torque. Top gears are often overdrive, below 1:1, so the engine turns slower than the output at highway speed.
Torque converter
An impeller driven by the engine flings fluid at a turbine connected to the transmission. A stator between them redirects fluid and multiplies torque at low speeds, up to about 2 times. At cruise, a lockup clutch joins engine and transmission directly to cut slip and heat.
Planetary gear sets
A sun gear, planet gears and an outer ring gear. Holding or driving different parts with clutches and bands produces different ratios from one compact set.
Heat
Fluid life drops sharply above about 90 °C; a commonly quoted rule is that every 10 °C rise above that roughly halves fluid life. That's why towing packages add a transmission cooler.
CVT
Two cone-shaped pulleys squeeze the belt; moving the halves apart or together changes their effective diameter. The fluid's special friction properties let the belt grip the pulleys, so the wrong fluid causes slipping and damage.
Adaptive shifting
The computer learns how clutches wear and adjusts pressure and timing to keep shifts smooth. After a fluid change or repair, it may need a relearn.

General information for typical vehicles. Your owner's manual may call for different intervals. See also our maintenance schedule and warning lights guide.

Need a hand with it?

Slipping, harsh shifts or a burning smell? Have your transmission checked before it gets worse.

Book Call Text Directions